Itens

• ANÁLISE DO MANEJO DOS RESÍDUOS DE SERVIÇO DE SAÚDE: UM ESTUDO DE CASO EM UM HOSPITAL UNIVERSITÁRIO DE MANAUS/AM.
  Esta dissertação tem como principal objetivo, analisar o processo de manejo e tratamento dos resíduos de serviço de saúde do Hospital Universitário Getúlio Vargas (HUGV). *Para isso, foram traçados os seguintes objetivos específicos: identificar os atuais locais de geração e segregação dos Resíduos de Serviços de Saúde (RSS) gerados; analisar o fluxo do processo de segregação, acondicionamento e tratamento realizados atualmente nos RSS; e, relacionar o manejo dos RSS com custo hospitalar para tratamento e disposição final. Para melhor aprofundamento no objeto de pesquisa, baseou-se em autores especialistas em estudos sobre o meio ambiente, resíduos de serviço de saúde, apoiando-se principalmente em: Gomes (et al, 2015), Oliveira (et al, 2018) e Ventura (et al, 2012). Por este trabalho propor analisar o processo de manejo dos resíduos e expor os possíveis impactos ambientas, foi necessário discorrer sobre as legislações vigentes, como a: Lei 6.938/81, que trata da Política Nacional do Meio Ambiente, Resolução 222/2018, que atualiza o gerenciamento de resíduos de saúde, nova Revisão da 306/2004; Lei 12.305/2010 que institui a Política Nacional de Resíduos Sólidos (PNRS) dentre outras. A pesquisa, trata-se de um estudo de caso de natureza qualiquantitativa, descritiva exploratória, sobre o Plano de Gerenciamento de Resíduos do HUGV. Na coleta de dados, foram usados os seguintes instrumentos: a entrevista e a observação. As informações foram coletadas através do Roteiro Observacional do Fluxo Atual e a construção do roteiro baseada na RDC 222/2018. Consistentemente, os resultados obtidos mostraram que o custo hospitalar com o tratamento de resíduos está diretamente relacionado ao manejo dos RSS. Com isso, concluiu-se que o processo de manejo realizado no hospital não está totalmente de acordo com a Legislação vigente, e que essa inconformidade tem como consequência o custo elevado para o tratamento e destinação final dos RSS, demonstrando a importância e a necessidade de realizar a atualização do PGRSS, do hospital. A pesquisa faz uma contribuição relevante ao HUGV com sugestões de propostas para melhorias no trabalho de manejo dos RSS.
• KNOWLEDGE OF MANAGEMENT OF HEALTH WASTE IN COVID-19 FOR ENVIRONMENTAL IMPACT
  The pandemic due to COVID-19 has been shaping the healthcare landscape, mainly due to the amount of Health Service Waste (RSS) that is being produced. Understanding how these SSR are managed and how health professionals are involved in this process can provide a better understanding of how this knowledge directly impacts the better management of the SSR itself, as well as the reduction of environmental impacts from this flow. The objective of the study is to evaluate the knowledge of health professionals on waste management in time of COVID-19. An exploratory, descriptive, cross-sectional, observational study was conducted with 55 health professionals, working in a public hospital in Manaus – Amazonas - Brazil. Were included subjects over 18 years old, working in an institution that dealt with confirmed cases of COVID-19. The instruments used in the data collection were: Questionnaire defining the profile of the participants; Questionnaire evaluating basic knowledge about waste management of health services. The results indicated that the institution of interest has a protocol for the management of residues contaminated by COVID-19 as reported by 50 participants (90.9%), but most do not know what the Health Services Waste Management Plan (56.4%) is, not received training on SRHS (69.1%), not knowing how to classify without difficulty which are the Health Service Residues (54.5%), even performing invasive procedures (87.3%). Even with the increase in demand for health services during the COVID-19 pandemic, training and knowledge on how to manage the waste from these services did not follow the same growth
• METHODOLOGY FOR IMPLEMENTING A PHOTOVOLTAIC PLANT IN A SMALL FOOD INDUSTRY
  O aprender é uma arte, até Brazil needs to increase the supply of sustainable and renewable energy such as solar and wind, especially in the northern region, where it has the highest electricity tariff in the country. The region is distinguished from other regions of the country by the existence of several isolated systems, most of them of small size with low reliability and quality of services with very high costs, in view of the need for thermal generation using diesel and fuel oil, as amount represents about 92% of all the fuel planned to be used in Brazil in the generation of thermoelectric energy, indicating a fuel cost in 2021 that exceeds R$ 2 billion reais, which is largely exceeded by the transfers of resources obtained through the Fossil Fuel Consumption Account (CCC). This work aims to develop a methodology for the production of on-grid photovoltaic energy in order to be integrated into the utility grid as a reference in energy generation. It is a great alternative to reduce electricity consumption, and Brazil has the necessary conditions to take advantage of such technologies. However, this strategic action must be integrated, in order to develop society in the economic, social and environmental areas. The development of the work provided the generation of economic, technical and environmental results on the use of solar energy in regions that have high energy generation costs, in this way we train the techniques and structures to benefit, including small industries and businesses with a capture of energy resources. The general objective is to evaluate the results of the implementation of a 40 Kwp Solar Energy on-grid photovoltaic system at Empacotadora Amazonas, in order to reduce operating costs and environmental impacts.
• OPTIMIZATION OF RELIABILITY AND USABILITY OF FUNCTIONAL TESTS OF THE PRODUCTION PROCESS IN THE COMPANY "TUCUMÃ SEM CASCA DE CABLE MODEMS"
  The test jigs are responsible for functional tests are complex and high performance equipment used in the electronics industry to validate the functionality of analog, digital devices or any other products of the electro-electronic industry in the industrial hub of Manaus. In the analyzed process, these gigas are arranged following a configuration in parallel with each other, and in series with the rest of the assembly line and the effect of a failure in this kind of configuration is critical, because the simplest failures can impact the production process generating several types of waste and, consequently, financial losses for the company. This work aims to study the behavior of the equipment of a production process of Cable Modems and Set Top Boxes, analyze the failures that occur during the process and guide the study of its reliability in order to allow the maintenance management to make decisions on how to handle the equipment, aiming to reduce failure rates and use appropriate maintenance practices to allow the maximization of reliability
• THE RELATION BETWEEN THE ENVIRONMENT AND PANDEMICS
  In late 2019, one of the biggest pandemics of our time, with the power to completely shut down cities, was revealed. This is Sars-cov-2, which spreads very quickly and is transmitted through the air. The Coronavirus is nothing new to the world and warnings about the risk of pandemics have existed for many years, such as that of the 2013 epidemic, made by the WHO (World Health Organization) at a time when there was already alarm about the potential of this virus to cause outbreaks. Pandemics are nothing new to humanity. They were present at different times in history, and this paper aims to present the link between pandemics and disturbances of the natural environment, with emphasis on zoonoses. Some pandemics and their consequences will be briefly exposed, pointing out parallels between them. The study was carried out through the analysis of scientific articles within the specified topic in journals with a high level of reliability, seeking to understand this phenomenon and how to face them. This paper was written while the world was going through the Sars-cov-19 pandemic and was evolving together with the discoveries made day by day by the scientific world. Goals were defined for this paper, such as studying zoonoses and their forms of transmission, analyzing the human factor and how it impacts the environment, and pointing out solutions to solve these problems. This literature review concludes that when humans invade the natural environment and destroy existing relationships in this place, diseases transmitted from animals or from the environment itself can arise, which may or may not cause new pandemics through zoonoses.
• SISTEMA DE SIMULAÇÃO COMPUTACIONAL PARA IMPLANTAÇÃO DE MELHORIAS EM PROCESSOS INDUSTRIAIS
  A evolução tecnológica é fundamental para desenvolvimento da sociedade, seus benefícios trazem conforto, economia de tempo e celeridade para solucionar problemas do cotidiano. Em 2022 é indispensável o uso de produtos industrializados como aparelhos televisores, celulares, ar condicionados e automóveis, porém, essa aceleração no consumo de produtos industrializados desafia as indústrias a aperfeiçoaram seus processos de fabricação, tendo em vista a adaptação constante de seus processos pelo surgimento de novos produtos. Em busca de evitar prejuízos, as empresas buscam minimizar os problemas durante a implantação de novos layouts com simulação computacional. Logo, essa pesquisa tem o objetivo mostrar a utilização da simulação computacional no desenvolvimento de melhorias em processos industrializados. Os materiais e métodos aplicados foram obtidos através coletas de dados do processo, entrevista com colaboradores, identificação de gargalos, análise e simulação do novo modelo de Layout através do software PLANT SIMULATION T15. Para a viabilidade da pesquisa, no que concerne aos registros e observações, exigiu-se a confidencialidade do nome da empresa objeto de estudo, com o crescente aumento nas vendas de ar condicionado, a empresa em questão aumentou sua capacidade produtiva de 1490 unidades por dia, para 1800 unidades. Foram identificados oitos estações de trabalhos que irão ser modificadas, que são: Compressor, Manta Térmica, Tampa do compressor, Carga de gás, Teste de voltagem, Teste funcional, Embalagem e Etiquetagem. A nova proposta é implantar novo layout somado ao emprego de automação, máquinas e robôs industriais. Os resultados da pesquisa mostram que as técnicas de simulação computacional trouxe previsibilidade a problemas que uma vez identificados podem ser resolvidos antes de ser implantados. Após implantação do modelo simulado proposto, foram feitas novas medições, onde os resultados foram satisfatórios, atingindo a meta de 1800 unidades por dia, reinterando importância na utilização da simulação computacional em processos industriais.
• THE DISPOSAL OF NEEDLES AND SYRINGES DURING THE COVID-19 PANDEMIC IN THE IRANDUBA HEALTH SYSTEM
  This paper aimed to develop evidence-based guidelines to make the disposal of syringes and needles, applied in vaccinations against Covid 19 safer and healthier in the UBS of the Health System of the Municipality of Iranduba, located in urban areas and non-riparian units. Thus, this research was based on a thorough process of observation, exclusively in the area of performance of the health management of the aforementioned municipality. The development process was carried out from an observational analysis, where the discarding of health supplies used in vaccinations against covid-019 in the year 2021 were realilized. In addition, a literature review was also performed for each of these steps. At the end of this arduous research, it was conclusively perceived the erroneous and harmful way in which the disposal of such solid waste was made, because these materials, soon after their use, were placed in a collection box, together with other sanitary inputs, perhaps the latter with the possibility of reuse or recycling, which would bring enormous risks to the workers of the UBS before the imminent probability of infection of covid-9.
• APPLICATION OF THE NONLINEAR AUTOREGRESSIVE MODEL WITH EXOGENOUS INPUTS FOR RIVER LEVEL FORECAST IN THE AMAZON
  The present work is justified by three basic lines that involve the problem of the theme, which are the use of Artificial Intelligence, the problem of floods in the Amazon and the issue of technology in favor of decision making. The environmental impacts caused by economic and social factors are problems portrayed in scenarios such as floods and ebbs of rivers, bringing up situations such as an increase in diseases, reduction of agricultural production in locations that depend on accurate geological control, in addition to the increase in erosive processes. in risk locations. Thus, the use of AI to predict the river level, which consequently can minimize problems arising from floods that cause an environmental impact, is highly possible, since when it is known in advance that an event is close to happening, decisions can be taken so that the impacts be smaller. This work models and applies NARX to forecast the river level in the Amazon with variables of easy access and implementation through the MATLAB software, in order to contribute with a forecast model capable of predicting a possible flood from the river level.
• SISTEMAS EMBARCADOS PARA EFICIÊNCIA ENERGÉTICA DE AMBIENTES CLIMATIZADOS
  O consumo de energia elétrica cresce à medida que a tecnologia avança, pois esse, em quase sua totalidade, depende de alimentação de alguma fonte de energia. O aumento desse consumo causa impactos positivos, mas também negativos um deles dá-se pelo alto custo desses recursos. Diante disso e da redução dos recursos destinados à Educação no Brasil, as instituições precisam buscar estratégias de redução de despesas. Dentre as possibilidades de redução de custos, encontra-se a redução no consumo de energia elétrica. Este trabalho teve como objetivo reduzir o consumo de energia elétrica, aumentar a vida útil dos aparelhos climatizadores e a melhorar o conforto térmico. Para reduzir os recursos gastos com a climatização, foi desenvolvido um sistema informatizado, visando controlar a temperatura nos ambientes climatizados e que possuíam movimentação de pessoas, por meio da utilização de sensores para aferir a temperatura ambiente, monitorar o acesso de pessoas, comunicação e controle dos aparelhos que fazem a climatização do ambiente. Após a implantação desta tecnologia nos ambientes propostos, o sistema passou a regular o(s) aparelho(s) de arcondicionado, buscando compensar a temperatura quando esta apresentava diferença da projetada pelo usuário, a partir da temperatura do ambiente aferida pelo conjunto de sensores. Assim, o funcionamento do aparelho era finalizado quando não havia pessoas no ambiente, ou era iniciado quando um usuário adentrava ao local.
• O GERENCIAMENTO DE RESÍDUOS SÓLIDOS COMO INSTRUMENTO DE SUSTENTABILIDADE EM DENOMINAÇÕES PROTESTANTES
  Nos dias de hoje, existe a preocupação mundial sobre as questões relacionadas ao meio ambiente e um dos maiores problemas ambientais causados são gerados por um gerenciamento inadequado dos resíduos sólidos e a falta do envolvimento da sociedade. O presente trabalho trata sobre o gerenciamento de resíduos sólidos urbanos em instituições religiosas cristãs protestantes, as quais também são geradoras de resíduos, portanto, merecem ser estudadas cientificamente, a fim de responder a seguinte questão norteadora: O gerenciamento dos resíduos sólidos em instituições cristãs protestantes na cidade de Manaus afirma-se como um instrumento eficaz para o conceito de sustentabilidade? O objetivo principal deste trabalho foi avaliar como instituições religiosas cristãs protestantes atuam no gerenciamento de resíduos sólidos urbanos, identificando se estas instituições fazem algum tipo de gerenciamento destes resíduos gerados, a fim de monitorar como isso é feito, utilizando as ferramentas de gestão da qualidade, metodologia e análise dos resultados alcançados. A metodologia aplicada foi descritiva, por meio da observação, registro, análise e a correlação do objeto ou fatos sob estudo, contudo, sem manipulá-los. Com as informações coletadas em igrejas selecionadas em todas as zonas da cidade, em igual quantidade, através de um prático formulário e checklist baseados na Política Nacional de Resíduos Sólidos, um quadro DMAIC foi construído a partir de informações coletadas das igrejas e sequencialmente a aplicação da ferramenta GUT, para apontamentos dos problemas mais urgentes. Os resultados desses apontamentos foram postos no ciclo PDCA para o planejamento de melhorias e por fim, foi utilizado o 5W2H para propor melhorias, facilitando a observação, coleta de dados e análise das informações obtidas. Os resultados da pesquisa demonstraram uma grande possibilidade dessas comunidades cristãs servirem de escolas ambientais e que, se realizado, poderá viabilizar uma verdadeira conscientização em massa da sociedade, graças à sua enorme abrangência.
• ARTIFICIAL NEURAL NETWORKS FOR PREDICTING THE GENETATION OF ACETALDEHYDE IN PET RESIN IN THE PROCESS OF INJECTION OF PLASTIC PACKAGES
  The industrial production of preforms for the manufacture of PET bottles, during the plastic injection process, is essential to regulate the drying temperature of the PET resin, to control the generation of Acetaldehyde (ACH), which alters the flavor of carbonated or non-carbonated drinks, giving the drink a citrus flavor and putting in doubt the quality of packaged products. In this work, an Artificial Neural Network (ANN) of the Backpropagation type (Cascadeforwardnet) is specified to support the decisionmaking process in controlling the ideal drying temperature of the PET resin, allowing specialists to make the necessary temperature regulation decisions for the best performance by decreasing ACH levels. The materials and methods were applied according to the manufacturer's characteristics on the moisture in the PET resin grain, which may contain between 50 ppm and 100 ppm of ACH. Data were collected for the method analysis, according to temperatures and residence times used in the blow injection process in the manufacture of the bottle preform, the generation of ACH from the PET bottle after solid postcondensation stage reached residual ACH levels below (3-4) ppm, according to the desired specification, reaching levels below 1 ppm. The results found through the Computational Intelligence (IC) techniques applied by the ANNs, where they allowed the prediction of the ACH levels generated in the plastic injection process of the bottle packaging preform, allowing an effective management of the parameters of production, assisting in strategic decision making regarding the use of temperature control during the drying process of PET resin.
• ANALYSIS OF THE CURRENT MANAGEMENT OF HEALTH SERVICE WASTE: A CASE STUDY OF A UNIVERSITY HOSPITAL IN MANAUS/AM
  The health waste management activity, whose steps range from the identification of generation sites to the environmentally appropriate final disposal, requires appropriate planning, where each step of the process needs to be performed properly to ensure worker safety and mitigate the impacts generated to the environment allied to the hospital costs. Current legislation, such as: Law 6.938/81, which deals with the National Environmental Policy, Resolution 222/2018, Law 12.305/2010, which establishes the National Policy on Solid Waste (PNRS), among others, guide this process. The general purpose of this case study is to analyze the current process of management and treatment of waste from the health service of the Hospital Universitário Getúlio Vargas (HUGV). To achieve these results, a quantitative/qualitative, exploratory descriptive research was carried out on the HUGV Waste Management Plan. The information was collected through an Observational Roadmap of the Current Flow, based on the ANVISA Board Resolution 222/2018. Consistently, the results obtained showed that the hospital cost of waste treatment is directly related to the management of HSW. With this, it was concluded that the management process carried out in the hospital is not fully in accordance with the current legislation, and that this noncompliance results in the high cost for the treatment and final destination of the HSW, demonstrating the importance and the need to update the hospital's PGRSS (Health Services Waste Management Program). The research makes a relevant contribution to the HUGV with suggestions for proposals for improvements in the work of managing HSW.
• LÓGICA FUZZY APLICADA NA ANÁLISE ERGONÔMICA DE TRABALHO NA INDUSTRIA AUTOMOBILISTICA PARA TOMADA DE DECISÃO
  A ergonomia têm-se mostrado cada vez importante para os processos industriais em todo mundo. A evolução de máquinas e equipamentos tem efetuados diversos transtorno na saúde ocupacional do trabalho. Sendo assim, de suma importância fazer uma leitura abrangente nos postos de trabalho e nas ferramentas de análise ergonômica. Objetivo desta pesquisa é fazer uma aplicação dos recursos tecnológicos da lógica fuzzy nos resultados encontrados na Análise Ergonômica do Trabalho (AET) em sete postos de trabalho na indústria automotiva do Polo Industrial de Manaus (PIM). Na metodologia foi aplicada a ferramenta ergonômica utilizando o método de Suzanne Rodgers e nos modelo matemáticos caracterizados de inferência fuzzy para tomada de decisão sobre os diversos distúrbios que acontece com a saúde do colaborador. Os dados da ferramenta ergonômica Suzanne Rodgers e demais observações nos postos de trabalho serão tabulados e servem de base para a aplicação de modelagem matemática na lógica fuzzy através da fuzzificação, motor de inferência e a defuzzificação com a variável de saída do risco classificado em cores. Sendo assim, servem para realizar um comparativo e poder discutir a importância dos processos ergonômicos em benefício do trabalhador na indústria automotiva para a tomadas de decisões.
• PROPOSED METHODOLOGY FOR ANALYSIS OF HARMONIC IMPACTS IN ELECTRICAL GRIDS USING DECISION TREE TECHNIQUE - PART 1
  The progressive use of power electronic devices, connected to the electrical system, has contributed to the increase of problems caused by harmonic disturbances in electrical networks. Thus, this work aims to develop a methodology to analyze the harmonic impacts on the electrical grids caused by non-linear loads with the use of the Decision Tree technique. The model used was the regression tree through the use of the Classification and Regression Tree (CART) algorithm, which relates the harmonic current of a non-linear load and the harmonic voltage at the common connection point of the electrical grid. The technique used was applied in a case study in order to show the validity of its application in solving problems that seek to investigate the dependency relationship between the two variables. Among the feeders used in the research for the 3rd harmonic analysis, feeder DIAL2-19 contributed the impact factor for phase A with 43.587%. The feeder DIAL2-16 contributed with impact factor 36.407% for phase B. For phase C feeder DIAL2-17 contributed 26.434% impact factor
• USO DE FERRAMENTAS COMPUTACIONAIS E DE QUALIDADE NA MELHORIA DE DESIGN DE MONITORES DE LCD
  Empresas em todo mundo buscam lançar uma quantidade considerável de novos produtos todos os anos. Durante este processo, geralmente são detectadas falhas de projeto e problemas de design. Neste contexto, este estudo objetiva explorar cientificamente os eventos ocorridos durante a implementação de um novo produto monitor de tela de cristal líquido, onde sua funcionalidade, aparência, qualidade e custo são considerados satisfatórios, no entanto, seu design teve impacto negativo sobre o processo de produção em massa e apresentou grande necessidade de melhoria. A pesquisa então buscou compreender as causas do problema e aplicar algumas soluções, principalmente para o maior defeito encontrado no projeto: infiltração de adesivo dentro do mecanismo de acionamento do botão joystick. A metodologia aplicada foi desenvolvida por meio de pesquisa-ação, o que significou no papel ativo na análise do problema e desenvolvimento de soluções dentro do ambiente de pesquisa e utilizou ferramentas da qualidade (PDCA, Ishikawa e Kaizen) e parâmetros das ferramentas de lógica Fuzzy (variáveis linguísticas, fuzzyficação, regras de Inferência e a defuzzificação). Como resultado, a organização obteve benefícios diversos, tais como redução de índice de defeitos de 20% para menos de 3%, diminuição de custos com peças de reposição e serviço de reparo, além do aumento dos indicadores de qualidade e produtividade. Houve também impacto nos custos do produto, com provável economia com a implementação da melhoria estimados na ordem de R$ 16 milhões em um período de seis meses. Considerando estes fatores, este trabalho produziu os efeitos desejados sobre seu objeto de estudo de forma satisfatória.
• ANÁLISE DO INVENTÁRIO DE EMISSÕES DE GASES DO EFEITO ESTUFA EM UMA INDÚSTRIA DE BENEFICIAMENTO DE PAPEL FOTOGRÁFICO NA CIDADE DE MANAUS
  No Pólo Industrial de Manaus (PIM), a indústria de beneficiamento de papel fotográfico é pouco representativa e é classificada como uma Indústria Química. Esse tipo de indústria fotográfica possui aspectos ambientais em seus processos produtivos, de manutenção e suporte administrativo, inclusive naqueles processos que apenas beneficiam os papéis fotográficos já emulsionados, transformando-os em tamanhos e formatos necessários para uso posterior em laboratórios de impressão de fotografia. Nessa perspectiva, o problema investigado nesta dissertação limitou-se às emissões de Gases de Efeito Estufa (GEE) num escopo 1 (emissões diretas) e 2 (emissões indiretas), através do uso do protocolo do Programa Brasileiro GHG Protocol (PBGHGP), possibilitando assim o inventariado dos dados e a estimativa da emissão total de GEE numa indústria do PIM de beneficiamento de papel fotográfico e nas operações as quais essa indústria possui o controle operacional. A combinação entre essas estratégias metodológicas foi pensada a fim de proporcionar uma discussão mais completa da temática abordada nesta pesquisa Como resultado da análise constatou-se que a principal fonte de GEE é oriunda do sistema de refrigeração no consumo de gás refrigerante R410A e que o controle e/ou gestão destes gases são possíveis de serem adotados, pois a indústria possui um sistema de gestão ambiental implementado capaz de gerenciar este aspecto ambiental e reduzir o impacto ambiental causado por emissões de GEE., cumprindo com responsabilidade seu papel social.
• DIGITAL TECHNOLOGIES REVIEW FOR MANUFACTURING PROCESSES
  It is apparent the industrial processes transformations caused by industry 4.0 are in advance in some countries like China, Japan, Germany and United States. But, in return, the developing countries, as the emergent Brazil, seem like to have a long way to achieve digital era. Considering manufacturing processes as the starting point the rise of industry 4.0, this research aims to show a review about the most important technologies used in smart manufacturing, including the main challenges to implement it at Brazil. The papers were collected from Web of Science (WoS), comprising 114 articles and 2 books to underpin this study. This exploratory research resulted in the presentation of some challenges faced by Brazilian industry to join the new industrial era, such as poor technological infrastructure, besides lack of investment in technologies and training of qualified people. Even though the primary motivation of this research was to present a panorama of smart manufacturing for Brazil, this study results contributes to the most of emergent countries, bringing together general concepts and addressing practical applications developed by several researchers from the international academic community.
• PROBLEMA DE ROTEAMENTO DE VEÍCULO E SUAS VARIANTES: UMA REVISÃO SISTEMÁTICA DE LITERATURA
  Este estudo aborda uma revisão sistemática da literatura sobre o Problema de Roteamento de Veículos (PRV) e suas Variantes, construindo um portfólio bibliográfico a respeito do tipo de PRV mais adequado para o serviço de correio. Para esta pesquisa foi adotada a metodologia ProKnow-C, possibilitando a escolha de artigos de forma mais assertiva, rigorosa e específica, eliminando redundâncias e subjetividades, pesquisando artigos nas bases Scopus e Web of Science. O objetivo deste artigo é analisar o estado da arte sobre PRV e suas variantes, e as principais abordagens metodológicas utilizadas, no contexto da logística de distribuição. Foram selecionados um total de 114 artigos alinhados com o tema, demostrando que existe uma vasta literatura sobre roteirização de veículos. Esta revisão mostra que o algoritmo genético com adaptações é o modelo mais utilizado atualmente para otimizar rotas de coleta e entrega de encomendas
• SYSTEM FOR ANALYSIS, SIMULATION AND IMPLEMENTATION OF IMPROVEMENTS IN THE AIR CONDITIONING MANUFACTURING PROCESS
  This work contains proposals for improvements in an assembly line of air conditioners in a factory located in the Industrial Pole of Manaus, in which the entire production process is described, as well as the presentation of its current plant. Factors that hinder the production process of the line were evaluated in order to promote improvements in the production capacity added to quality, efficiency and reduction of waste. To achieve the improvements, documentary records of the line made available by the company were used. In addition, simulation tools (Plant Simulation) were used to search for possible bottlenecks in order to correct them, as well as plan for future improvement points. In this, problems of quality, ergonomics, low quality, among other obstacles were identified. The project enabled solutions to improve processes that, consequently, will increase quality, efficiency and productivity. The advantage of the new layout is to obtain a new sustainable competitive advantage for the company. The model enables better training of employees in the use of automated tools. This is beneficial as employees will have access to product and process technologies that were previously restricted.
• APPLICATION OF ERGONOMIC WORK ANALYSIS IN AUTOMOTIVE INDUSTRY PROCESSES USING COMPUTATIONAL INTELLIGENCE FOR DECISION MAKING
  Ergonomics have proved to be increasingly important for industrial processes around the world. The evolution of machinery and equipment has caused several disorders in occupational health at work. Therefore, it is extremely important to make a comprehensive reading of the workstations and ergonomic analysis tools. The objective of the article is to make an application of the technological resources of fuzzy logic in the results found in the Ergonomic Analysis of Work (AET) in seven jobs in the automotive industry of the Industrial Pole of Manaus (PIM). The methodology applied is based on the application of ergonomic tools using Suzanne Rodgers`method and on the mathematical models characterized by Fuzzy Inference for decision making on various disorders that occur with the health of the employee. The results found in the ergonomic tool ‘’Suzanne Rodgers’’ applied to the movement of upper and lower limbs and other observations in the productive sectors, with the application of Fuzzy Logic, it was shown that the linguistic variables by colors, the legend that shows the classification of ergonomic risks through run. Therefore, they serve to make a comparison and discuss the importance of ergonomic processes for the benefit of the worker in the automotive industry for decision-making
• IMPLEMENTATION OF DESIGN IMPROVEMENT IN A LCD MONITOR PRODUCT THROUGH THE APPLICATION OF FUZZY LOGIC AND QUALITY
  Companies all over the world aim to launch a considerable amount of new products every year. During this process, project failures and design problems are often detected. In this context, this paper aims to scientifically explore the events that occurred during the implementation of a new LCD (Liquid Crystal Display) monitor product, where its functionality, appearance, quality, and cost are considered satisfactory; however, its design has a negative impact on the mass production process and presents a great need for improvement. The study then sought to understand the causes of the problem and apply some solutions, especially for the biggest defect found in the project: infiltration of adhesive inside the joystick button actuation mechanism. The applied methodology used quality tools (PDCA, Ishikawa and Kaizen) and parameters from Fuzzy logic tools (linguistic variables, fuzzyfication, Inference rules and defuzzification). As a final result, the organization obtained several benefits, such as reducing the defect rate from 20% to 3%, reducing costs with spare parts and repair service, and increasing quality and productivity indicators.
• EMBEDDED SYSTEMS FOR ENERGY EFFICIENCY OF CLIMATE ENVIRONMENTS
  The consumption of electricity grows as technology advances, as this, almost entirely depends on the power of some energy source, the increase in this consumption causes positive impacts, but also negative one of them is due to the high cost of these resources , the reduction of resources destined to education in Brazil makes institutions look for strategies to reduce expenses and one is, to be able to use efficiency in the consumption of electric energy. This work aims to reduce electricity consumption, increase the duration of climate control devices and improve thermal comfort. To reduce the resources spent on air conditioning, a set of software and hardware was developed, aiming to control, in an automated way, environments with movement of people and with low management of resources, the use of sensors to measure the ambient temperature, control of people and, communication and control of the devices that make the environment climate control. After the implementation of this technology in the proposed environments, the system started to regulate the air conditioning device(s), seeking to compensate the temperature, when this is different from that projected by the user, from the ambient temperature measured by the set sensors and end the device activity when there are no people in theenvironment as well as start when a userentersthe site
• ANALYSIS OF THE GREENHOUSE GAS EMISSIONS INVENTORY IN A PHOTOGRAPHIC PAPER FINISHING INDUSTRY IN THE MANAUS CITY
  In the Manaus Free Zone, the processing industry of photographic paper is poorly representative and, is classified as a Chemical Industry. This type of photographic industry has environmental aspects in all its production processes, including those that only benefit the already emulsified photographic papers, transforming them into sizes and formats necessary for later use in photo printing laboratories. From this perspective, the problem to be investigated in this dissertation was limited to emissions of greenhouse gases (GHG) in scope 1 and 2, using the protocol of the Brazilian GHG Protocol Program (PBGHGP) thus enabling the inventory of data and the estimation of the total GHG emission in a native industry of photographic paper processing. As a result of the analysis, it was found that the main source of GHG comes from the cooling system in the consumption of refrigerant R410A and that the control and/or management of these gases are possible to be adopted, because the industry has an implemented environmental management system capable of managing this environmental aspect
• SOLID WASTE MANAGEMENT AS AN INSTRUMENT OF SUSTAINABILITY IN PROTESTANT DENOMINATIONS
  Nowadays, there is a worldwide concern about issues related to the environment and one of the biggest environmental problems caused are generated by inadequate solid waste management and the lack of society's involvement. The present work deals with the management in Protestant Christian religious institutions, which are also producers of solid waste and, therefore, deserve to be studied scientifically, in order to answer the following guiding question: Solid waste management in Protestant Christian institutions in the city of Manaus asserts itself as an effective instrument for the concept of sustainability? The main purpose objective of this work is to evaluate how Protestant Christian religious institutions act in the management of solid waste, identifying if such these institutions do any kind of management of this generated waste, in order to monitor how it is done using quality management tools, methodology and analysis of the results achieved. The applied methodology will be descriptive, through observation, registration, analysis and correlation of the object or facts under study, however, without manipulating them. With the information collected from selected churches in all areas of the city, in equal quantity and, through a practical formulary and checklist based on Brazil’s the National Policy on Solid Waste (PNRS), it will be possible to build a DMAIC framework and sequentially apply the GUT tool, to notes on of the most urgent problems. The results of these notes will be put into the PDCA cycle for improvement planning and, finally, the 5W2H will be used to propose improvements, which will facilitate observation, data collection and analysis of the information obtained. The survey results showed a great possibility of these Christian communities to serve as environmental schools, and that if it would be carried out, could bring a real mass awareness of society, thanks to its enormous scope.
• METHODOLOGY FOR INVENTORY RISK ANALYSIS AND MANAGEMENT USING EXCEL AND VISUAL BASIC MODELING
  Visual Basic for Application (VBA) programming, when used in an Excel programming environment, is an important tool in determining inventory classification risks, as well as an excellent option in view of the current situation of scarcity of classification optimization assessment. inventory risks. This work aims to contribute to the development of programming for an application in VBA - Excel, with the ability to classify inventory risks, capable of delivering data and assertive responses, according to the concepts established within the organization. To achieve this objective, a field research was carried out with small and medium-sized companies in the city of Manaus, Amazonas. The research is classified as experimental, allowing the achievement of qualitative type results. The use of the proposed tools will be available to academic circles and the result of the study will be used to improve the quality of information and data speed, whenever necessary, for management decision-making. It is also expected that this research will contribute to foster discussion about the proposed theme and serve as a technicaltheoretical framework for practical application for users and programmers in Solver and VBA tools.